Product Name：手機攝像頭

Material[材料]：金屬粉末MIM

Part Weight[克重]：6.5g

Cavity Qty[模穴]：2

System Type[系統類型]：開放式熱流道系統

Description 說明：

     占瑞針對小產品研發的一嘴多頭結構系統(每個點位位置可以不一樣)。

      產品為一模兩穴，流道采用流變平衡技術，確保各熱嘴壓力降保持一致，適用于小產品及產品排位緊密的模具。

【此套系統產品兩點最小間距為15MM，最大間距為18MM】，大幅降低加工成本，模具成本！

ANRY develops a multi head structure HRS for small products (each point position can be different). 

This product is one mold with two cavitives, and the runner adopts rheological balancing technique , which ensures that the pressure drop of each nozzle keeps the same, and it is suitable for the small products or compact mould products. 

【The minimum distance between two points of this system product is 15mm, and the maximum distance is 18mm. 】

It is greatly reducing the processing cost and mold cost! 

熱嘴發熱絲纏繞在本體上，每個點位都是單獨控溫，溫度控制精準 ！

The nozzle heating wire is wound on the nozzle body, each point temperature is individually controlled, and the temperature control is accurate!