熱流道熔噴模具 VS 傳統“衣架式”模具

▲ 生產周期快，熱流道替代傳統“衣架式”，縮短成型制件周期。

Fast production cycle time, instead of the traditional "Hanger Type", shorten the molding cycle time.

▲ 降低材料標準，傳統“衣架式”需要整塊板拋光，對鋼材材料要求高，而熱流道系統則大大降低對鋼材的要求。

Reduce the material, the traditional "Hanger Type" requires a whole plate polishing, which requires high steel materials, while the hot runner system greatly reduces the requirements for steel.

▲ 進膠平衡，熱流道采用內部幾何平衡設計，相比傳統“衣架式”，熱流道有更好的平衡。

Inlet balance, the hot runner adopt internal geometric balance design, compared with the traditional “Hanger Type”, the hot runner system has a better balance.

▲ 壓力均衡，熱流道采用多層流道設計，通過不同的路徑進行分流，這種模式可以使送料壓力更均衡。

Pressure balance, the hot runner is designed with multi-layer runner, which is divided by different paths. This mode can make the feeding pressure more balanced.

▲ 溫度均衡，熱流道板上的加熱裝置，可使原料溫度始終處于一個穩定的狀態，避免噴絲過程中，因溫度失衡而導致的累積性堵孔問題。

Temperature Balance, the heating device on the hot runner plate, can keep the temperature of raw material in a stable state all the time, and avoid the cumulative plugging problem caused by temperature imbalance in the process of silk blowing.

占瑞熱流道熔噴模具（10點）

占瑞熱流道熔噴模具（14點）